MatlabCode

本站所有资源均为高质量资源,各种姿势下载。

您现在的位置是:MatlabCode > 资源下载 > 仿真计算 > Comparizion of BER for STBC and STTC systems

Comparizion of BER for STBC and STTC systems

资 源 简 介

Comparizion of BER for STBC and STTC systems

详 情 说 明

When comparing the Bit Error Rate (BER) performance of Space-Time Block Coding (STBC) and Space-Time Trellis Coding (STTC) systems in wireless communication, several key differences emerge. Both techniques are designed to improve signal reliability in multiple-antenna systems, but they approach the problem differently.

STBC systems primarily focus on providing diversity gain through orthogonal designs, which simplifies decoding while maintaining good performance. The BER curve for STBC typically shows a steady improvement as SNR increases, with the slope reflecting the diversity order achieved. The decoding complexity remains relatively low due to the orthogonal structure of STBC codes.

STTC systems, by contrast, combine both diversity and coding gain through their trellis structure. This generally results in steeper BER curves at high SNR values compared to STBC, indicating better error performance. However, this comes at the cost of increased decoding complexity, as the Viterbi algorithm must be used to exploit the full benefits of the trellis code.

The crossover point where STTC starts outperforming STBC depends on factors like the number of antennas, specific code designs, and the operating SNR range. In practical scenarios, STBC might be preferred for its simplicity when moderate performance suffices, while STTC becomes advantageous when the highest possible error performance is required and the system can handle the additional complexity.